...
The print profiles are designed to handle overhangs of 45° with very high thermal mass (thick walls/infill) without warping and good surface finish. This requires a generous amount of cooling that limits the strength potential of the parts. For models that have few or non demanding overhangs, cooling can be reduced to 10% for both PA-CF and PA-GF to maximize part strength.
...
Filament | No Overhangs | Shallow overhangs (close to vertical) | 45° Overhangs | Steep Overhangs (close to horizontal) |
|---|---|---|---|---|
PA-GF | 0% | 10% | 30% | Use supports |
PA-CF | 0% | 15% | 20% | Use supports |