...
Tools Required:
2.5mm Allen Hex Driver
Torque screwdriver (optional)
Parts Needed:
HEPA ventilation fan assembly
Four M4x12 flathead screws (on the machine)
Four countersink washers (on the machine)
...
Open the package containing the HEPA filter ventilation fan assembly. Using the same four Flathead screws and countersink washers from step 2, attach the new assembly to the back of the printer where the blanking plate cover was removed. Tighten the flathead screws hand tight, or to 3Nm, in a criss-cross crisscross pattern. Be sure to run the fan cables so that they are coming out of the bottom side of the lid. Locate the existing plug on the cable track at the rear of the printer. Connect the fan assembly plug into this plug on the cable track.
...