...
Select the profile according to the material you are printing with.
...
0.2mm Carbon Fiber PETG
...
Pantheon HS3 0.2mm PA-GF Rev3.0
Pantheon HS3 0.2mm PA-CF Rev3.0
Filament
...
Rev3.1
Default setting for PETG parts.
0.3mm DRAFT Carbon Fiber PETG Rev3.1
Reduced print time by 20-40%. Larger layer height and less resolution, but will get it done fast.
0.2mm Carbon Fiber Nylon Rev3.1
Default setting for CF-Nylon parts.
0.2mm Glass Fiber Nylon Rev3.1
Default setting for GF-Nylon parts.
Filament
Carbon Fiber PETG Rev3.1
general purpose material:
45-50 MPa tensile, depending on process settings
operating temp up to 70°C
great layer bonding - 85% isotropic
good uvUV/chemical resistances
| Info |
|---|
All the printed parts on the HS3 motion system and frame are printed in CF-PETG |
...
Carbon Fiber Nylon Rev3.
...
1
High temp, High Stiffness, High strength
...
| Info |
|---|
We use this for components on the print head exposed to high temperatures |
...
Glass Fiber Nylon Rev3.
...
1
High temp, high impact, high lubricity
...