...
Select your network and enter the password.
Once the machine has connected, you will be able to connect to the Web https://pantheondesign.atlassian.net/wiki/spaces/DSBM/pages/673939995/Printer+Controls#Web-Console .
Ethernet
Plug your ethernet cable into the ethernet jack on the back of the HS3, it is located above the power cord receptacle.
It may take 1-2 minutes for the ethernet to connect.
Once the machine has connected, you will be able to connect to the Web https://pantheondesign.atlassian.net/wiki/spaces/DSBM/pages/673939995/Printer+Controls#Web-Console .
Advanced Networking Setup
Advanced networking setup here → Advanced Networking Settings https://pantheondesign.atlassian.net/wiki/x/MgBBK
...
Slicer
Pantheon Slicer is how we convert our 3D models into g-code the HS3 can use to make parts. Slicing software is equivalent to CAM or programming in the CNC world. The slicer takes parts and “slices” them into layers that the printer prints. The slicer generates the exact path the nozzle follows. Things like wall thicknesses, top and bottom thicknesses, speeds, support structures etc. are all configured in the slicer.
...