Getting A 3D Model

The following file types are supported by SuperSlicerPantheon Slicer: STL, 3MF, OBJ, and AMF

Pantheon recommends We recommend you export your 3D models as a high-quality STL

Info

When exporting 3D models assure that:

the model is of high resolution when exporting, a 3d you are exporting in the highest resolution your CAD tool provides, a 3D print will never have more resolution than the model its printed from .
Set your export model units to mm, other units may cause scaling issues

...

Uploading Gcode

On your web browser go to the URL of your printer

Info
you can find this on the printers touchscreen, press the Configuration button then the Network button and the URL will be on the top left. See How to use the HS3's touchscreen

On the web interface click on the tab G_CODE FILES. See How To Use The HS3's Web Interface

Click the Upload Gcode button and select the .gcode file you want to print.

...

If the spring steel print bed is not hot proceed to the next step. Otherwise remove the bed and place on a work surface.
Inspect the spring steel print bed for any debris, scrape away an print material if present.
Wipe clean bed using methanol or 99% isopropanol (wear gloves when using methanol).
Apply a thin even layer of Bed Prep using the applicator. Place bed back in the printer if it was removed.

...