Updating Slicer Settings - PrusaSlicer

On June 1, 2023 we have updated new machine profiles and migrated to PrusaSlicer 2.6.0 Beta. Follow this guide PrusaSlicer to setup PrusaSlicer.

Reasons we switched to PrusaSlicer:

SuperSlicer has been falling behind PrusaSlicer in pushing new updates
Faster program launch and Gcode generation due to multithreading
More refined UI tools such as Cut and Measure
“Organic supports” auto generate tree supports that are great for intricate parts

Delete old settings

Open PrusaSlicer and delete all the old settings by clicking the Settings tabs and clicking the "X" beside the drop-down menu for all profiles.

You need to navigate the Print Settings , Filament Settings and Printer Settings tab and delete all existing profiles from there.

Download the Pantheon HS3 config bundle below:

Config Bundle	Notes	File

Config Bundle	Notes	File
Rev3.0	Easy to remove supports with improved overhang and bridging quality. Overall surface quality and part strength
Rev3.2	Optimized bridging layer bonding

Navigate to File -> Import -> Import Config Bundle... Select the Pantheon_PrusaSlicer_config_bundle_Rev3.0 you just downloaded

note: there is also an option here called Import Config..., this is NOT the right option