Tools and Parts Required

• 2.5mm Hex Tool

• 10A ATC Mini-blade fuse

Before Replacing the Fuse

Ensure the Printhead is not damaged before replacing the fuse. Contact Pantheon Design support and we can walk you through this process.

Replacing the Fuse

1. Power off and unplug the machine

2. Unscrew the Wi-Fi antenna from the back panel

3. Using a 2.5mm hex tool, remove the 6 screws holding on the machine back panel:

   Open

   

4. Remove the right-most fuse from the power distribution board and replace with a fresh fuse:

   Open

   

5. Reinstall the back panel

6. Reinstall the Wi-Fi antenna

7. Plug in and power on the machine

8. Ensure the LEDs on the print head light up, and that the print head cooling fan is spinning