Tools and Parts Required

Before Replacing the Fuse

Ensure the Printhead is not damaged before replacing the fuse. Contact Pantheon Design support and we can walk you through this process.

Power off and unplug the machine
Unscrew the Wi-Fi antenna from the back panel
Using a 2.5mm hex tool, remove the 6 screws holding on the machine back panel:
Remove the right-most fuse from the power distribution board and replace with a fresh fuse:
Reinstall the back panel
Reinstall the Wi-Fi antenna
Plug in and power on the machine
Ensure the LEDs on the print head light up, and that the print head cooling fan is spinning