Dimensions

Machine Dimension	Value

Machine Dimension	Value
Height x Width x Depth	725mm x 700mm x 775mm 28.5” x 27.5” x 30.5”
Height with Open Lid	1200mm 47.5”
Depth with Door Open	1320mm 52”
Clearance Required Behind the Machine	205” 8”
Clearance to the Right of the Machine for the Filament Enclosure	200mm 7.9”
Weight	97kg 215lbs

Filament Enclosure Dimensions	Value

Filament Enclosure Dimensions

Value

Height x Width x Depth

420mm x 180mm x 370mm

16.5” x 7.1” x 14.6”

Depth with Door Open

510mm

20.1”

Weight

5.5kg

12.1lbs

Electrical Requirements

100-240V AC, 50/60Hz

Machine State	Power

Machine State	Power
Idle	59W
Heating Up (Bed + Printhead)	800W
Heating Up (Chamber + Printhead)	1000W
Peak Heating Up (PTC)	1100W
Maintain Idle Temp	400W - 525W
Printing	450W - 750W
Power Supply Rating	751W
Power Supply Overload Protection	939W

The tools we use and what we encourage our customers to use are listed below and are available with our service kit.

5mL Kluber ISOFLEX NBU 15 Grease
Grease Applicator Hose
Fine Syringe Tip
Torque Screwdriver 0.5 - 3Nm
Wera Hex bits
- 2mm
- 2.5mm
- 3mm
Wera Mini 1/4" Ratchet
1/4" 9mm Deep Socket
Wera metric L Key Set (1.5mm, 2.0mm. 2.5mm, 3.0mm, 4.0mm, 5.0mm, 6.0mm, 8.0mm, 10.0mm)

Pantheon recommended chemicals and consumables:

Machine Component Overview

Printhead Component Overview