HS3 Printed Parts Catalog

Below are some common wear components for the HS3. If the printed part you need is not here, please contact support.

We have combined multiple parts into a 3MF that you can load into Pantheon Slicer so we can preserve print settings, orientation and support structures. You can delete the parts you don't need before running the print once loaded into Pantheon Slicer.

Parts	Materials and Hardware	File

Parts	Materials and Hardware	File
Open	Print material: CF-PETG	Open
Open Filament Guide Elbows	Print material: CF-PETG Hardware: Torx Plus Rounded Head Thread-Forming Screws	Open
Open	Print material: PA-CF Hardware: M3 Heatset - McMaster See the diagram below for placement and amount. Open	Open