This is an overview of how the touchscreen works. Click around and explore to familiarize yourself.
There are several unused manual setup/configuration screens to be removed in a future update. While using them won’t break the machine, they can negatively affect print performance, do not not use them.
The screens are:
- Bed Mesh
- Z-Calibrate
- Limits
- Save config
CAUTION
When jogging the axes around, keep body parts out of the way of machine travel.
After setting the print head and bed temperature, they will be hot enough to burn you.
The web console is accessible via any web browser.
Connect to the Web Console
On the printer's touchscreen, touch the settings button and then the network button.
On the top left of the screen, it will display the local address, it will start with 192.XXX.XXX.XX
Type the IP address in a web browser connected on the same internet network as the printer and the web interface will load.
Main Menu
.png?version=2&modificationDate=1690159795661&cacheVersion=1&api=v2)
Homing
Temperature
Actions
Configuration
.png?version=1&modificationDate=1690162776355&cacheVersion=1&api=v2)