On June 1, 2023 we have updated new machine profiles and migrated to PrusaSlicer 2.6.0 Beta. Follow this guide Slicer Intro to setup PrusaSlicer.
Reasons we switched to PrusaSlicer:
SuperSlicer has not pushed new updates for many months and lagging behind, while PrusaSlicer is developing new features frequently
Faster program launch and Gcode generation due to multithreading
More refined UI tools such as Cut and Measure
“Organic supports” auto generate tree supports that are great for intricate parts
Delete old settings
Open PrusaSlicer and delete all the old settings by clicking the Settings tabs and clicking the "X" beside the drop-down menu for all profiles.
You need to navigate the Print Settings , Filament Settings and Printer Settings tab and delete all existing profiles from there.
Import new settings
Download the Pantheon HS3 config bundle below:
Config Bundle | Notes | File |
|---|---|---|
Rev3.0 |
| |
Rev3.2 |
|
Navigate to File -> Import -> Import Config Bundle... Select the Pantheon_PrusaSlicer_config_bundle_Rev3.0 you just downloaded
note: there is also an option here called Import Config..., this is NOT the right option
