| Note |
|---|
If you have an older HS3 Machine it may be necessary to update your printers config file to be compatible with the new print profile start gcodes. You can find instructions to update your config file manually here: Machine Errors After Profile Update |
| Info |
|---|
Machine start behavior in this revision will be different from previous. The machine will now preheat the top plate to reach a temperature of 32°C before probing the bed which may take upwards of 10 minutes when ambient conditions are cold and it is the first print of the day. Additionally, the machine preheats to three different temperatures throughout the preprint procedure, which may include periodic pauses, please note this is normal operation. |
This update is released in tangent with new Pantheon Slicer Revision 2.6.1 https://pantheondesign.atlassian.net/wiki/spaces/docs/pages/76742657/Pantheon+Slicer#Install-PantheonSlicer-(2.6.1)
...