Versions Compared

Version Old Version 6 New Version 7
Changes made by

Riley gunn

Bobc

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Symptom

Possible Cause

Solution

First layer is squished

Wet Filament

  • Debris on bed during probing

  • Bed is not level

    • https://pantheondesign.atlassian.net/wiki/spaces/DSBM/pages/673710240/Material+Handling#Filament-Moisture

    Debris on bed during probing

    https://pantheondesign.atlassian.net/wiki/spaces/DSBM/pages/673939985/Normal+Operations#Preparing-the-Printer-and-Starting-a-Print

    Bed is not level

    https://pantheondesign.atlassian.net/wiki/spaces/DSBM/pages/675840160/Heated+Bed#Calibration

    Z-banding

    • Ball screw wobble

    ...