...
Symptom | Possible Cause | Solution |
|---|---|---|
First layer is squished | Wet Filament | |
Debris on bed during probing | ||
Bed is not level | https://pantheondesign.atlassian.net/wiki/spaces/DSBM/pages/675840160/Heated+Bed#Calibration | |
Z-banding | Ball screw wobble | |
Damaged Z-axis Ball-screw(s) | ||
First few layers of the print look “crunchy”, but subsequent prints do not | Filament has become wet in the filament tube |
...
Printer Malfunction or Abnormality
...