NOTICE If you have any issues that are not addressed here please get in touch with us at: support@pantheondesign.ca

Maintenance Schedule

Time Interval	Recommended Service
Daily or prior to every print (Pre-Check)	Clean the print sheet Coat print sheet with release/bonding agent Clean the Nozzle/hotend Check filament amount and material and moisture level
Monthly or after 15kg of Filament	Inspect and replace the nozzle if needed Clean machine of debris Inspect print sheet for cracking and damage Clean camera lens
Every 3 months or 45kg of Filament	Replace nozzle Inspect hot end for plastic leakage and wire damage Inspect part cooling duct for plastic build-up Inspect print sheet Check filament guide tube for wear Check guides/ballscrews for dust and debris, clean if needed
Every year or 180kg of Filament	Clean and regrease guides/ballscrews Clean dust from electrical panel Replace hot end Replace Print Sheet Replace PTFE Filament Paths