Overview
Contents from left to right, top to down:
Camera
Run-out sensor
CM4
Entry port
Loctite
Camera:
Contents from left to right, top to down:
1 x Camera module
2 x M4 - 18mm screw
3 x 18lb zip tie
Pantheon HS3 Camera Installation
Run-out sensor
Contents from left to right, top to down:
1 x Run-out sensor module
3 x 18lb zip tie
2 x M4 - 40mm screw
1 x Sensor Cable
1 x 148mm PTFE tube
Filament Switch Sensor and Entry Port Installation
CM4
Contents from left to right, top to down:
4 x M2.5 - 5mm screw
1 x Raspberry Pi CM4
1 x Wifi antenna
Compute Module and Antenna Installation
Entry Port
Contents from left to right, top to down:
1 x entry port
2 x m4 - 16mm screw