/
HS3 Service Documentation (Old)
HS3 Service Documentation (Old)
- Bobc
- Riley gunn
- CaseyHWong
Owned by Bobc
These articles cover service procedures for the HS3
Contents
Install and Remove A Printhead (Old)archived
Load and Unload Filament (Old)archived
Swapping Between Filament Types (Old)archived
Replace a Nozzle (Old)archived
Lubricate The Motion System (Old)archived
How to Replace a Hot End (Old)archived
https://pantheondesign.atlassian.net/wiki/spaces/docs/pages/45449234
Replacing a Y-Motor Mount (Old)archived
https://pantheondesign.atlassian.net/wiki/spaces/docs/pages/35520522
Upgrade the Part Cooling Duct (Old)archived
Removing and Installing the Y-axis Servo Motor Coupler (Old)archived
www.pantheondesign.com