First layer is squished

• Wet Filament

• Debris on bed during probing

• Bed is not level

• https://pantheondesign.atlassian.net/wiki/spaces/DSBM/pages/673710240/Material+Handling#Filament-Moisture

• https://pantheondesign.atlassian.net/wiki/spaces/DSBM/pages/673939985/Normal+Operations#Preparing-the-Printer-and-Starting-a-Print

• https://pantheondesign.atlassian.net/wiki/spaces/DSBM/pages/675840160/Heated+Bed#Calibration

Printhead is not extruding

• Nozzle Jam

• Hotend Jam

• Extruder Jam

• Extruder Driveshaft Failure

• Replace a Nozzle

• How to Replace a Hot End

• Clearing a Printhead Drive Roller Jam

Motion system is noisy

• Dirty or no lubricant

• Lubricate The Motion System

Clicking or squeaking noise from X or Y axis

• Bearing Failure

• Coupler Failure

• Replacing a Y-Motor Mount

• Y-axis Servo Motor Couplers