The following table options are suitable for a Pantheon HS3 and HS-Pro machine. If you are planning on using a different table, ensure it is similar in structure to these suggested tables. A strong, sturdy table in the 28in to 36in (700mm to 900mm) height range is best suited.

Global Industrial

• Global Industrial™ 48 x 36 Adjustable Height Workbench C-Channel Leg - Steel Square Edge - Gray

• Costs about $300 USD

• Optional Power outlet attached to the table for about $50

• A little bit larger than needed, the width of 48” gives quite a bit of room on either side of the printer and filament enclosure. “Roomy”

• Adjustable height between 29” and 35”

• Strong steel construction that assembles easily.

• Capable of 2000lbs.

• Anchorable to the floor if needed.

• Wood surfaced options for added price.

ULINE

• Industrial Packing Table - 48 x 36" Composite Wood Top

• Costs about $330 USD

• Optional Power Outlet attached to the table for about $45

• A little bit larger than needed, the width of 48” gives quite a bit of room on either side of the printer and filament enclosure. “Roomy”

• Adjustable height between 30” and 37”

• Comes with a storage shelf underneath

• Nice wood surface.

• Capable of 500lbs.