Modifying Features.yml
- Alex Wiecke
Some upgrades to your HS3 may require changing the printer’s configuration settings.
Pantheon’s HS3 uses a config management tool to generate printer.cfg based on a list of features and hardware installed in the printed. This file can be found under config/features.yml
Template Download
Format
Features.yml is a YAML formatted file listing the basic features and settings for your HS3. There are mandatory fields for features all printers have, and optional fields for features only some printers have.
Below is an example of a default features.yml file
---
printer:
process: FFF
axes-limits:
x: 300
y: 307.5
z: 300
hardware:
chassis: original
mainboard: manta-m8p-v2-0
printhead-board: ebb42-v1-2
printhead: original
z-ballscrews: ground
camera-light: direct-wired
filament-sensor: direct-wired
...Format Rules
Â
All files must start with --- and end with ... characters.
Sections must be indented as shown in the above example
All names are case-sensitive
Mandatory Fields
The following is the mandatory minimum set of fields for a features.yml file:
axes-limits
x, y, z Maximum travel for each axis in millimeters
hardware
chassis Machine frame style. original is the only option
printhead Printhead style. original is the only option
mainboard Machine main board. Either manta-m8p-v1-2 or manta-m8p-v2-0
printhead-board Printhead board. ebb42-v1-2 is the only option
Optional Hardware Fields
All of these options must be added under the hardware: level in features.yml
www.pantheondesign.com