Tools Required:

• 7mm Socket

• Torque wrench

Parts Needed:

• Nozzle

Step 1: Move the Bed and Print Head

• Using the printer control panel move the bed down to Z200 to provide adequate working space.

• Move the print head to the center of the build volume (X150, Y150).

Step 2: Preheat the Nozzle

• Preheat the nozzle to 200°C. This will help loosen the nozzle for removal.

Step 3: Remove the Old Nozzle

• Using a 7 mm socket, loosen the old nozzle from the hot end and carefully remove. Be cautious, as the nozzle will be hot.

• Place the nozzle on a heat resistant surface such as a metal tray.

Step 4: Install the New Nozzle

• Take your new nozzle and carefully thread it into the hot end. Ensure that it is properly aligned to avoid cross-threading.

• Use a torque wrench to tighten the nozzle to 5Nm or 45in-lb. This will ensure a secure and leak-free installation.

• Done! Resume printing or cooldown the printhead.